Creatbot

Creatbot 3D-Drucker D1000


Item number 200274

* Incl. VAT excl. Shipping


D1000 is upgraded from the model F1000. With a build volume of over 1000*1000*1000mm, it is the perfect machine for creating large and full size parts, prototype, tools, molds, jigs & fixtures in-house. Within days you can have a fully functional high quality prototype. CreatBot big rolls filament of PLA, ABS, ASA, PA-CF, etc suit well for your big models without worrying frequent replacement of filament. All its features manufactured to the highest standards.
Every time, every parts, no mistake.

Size worry-free
For High strength prototype

The CreatBot D1000 was created to make industrial 3D printing of large-scale objects and prototype as easy as possible.
It is embedded with many advanced technology for ultra big, impressive prints. It will be your best choice with no doubt,
If you are looking for an lndustrial large scale 3D printer for prototype and engineering-grade materials.

If you are tired of the fragility of PLA and the deformation of ABS, try our revolutionary material UltraPA-CF.
Print your large model with a big size nozzle, in a few days, you will get an oversized model with high strength 80MPa
and temperature resistance 150 ° C. The best choice for your prototype verification.

Auto-rising Dual Extruders 420 ℃

D1000 is embedded with new smart auto-rising dual-extruder kit hotend temperature up to 420 ℃, The hotend
can be replaced to different size one fastly. it is able to print not only huge PLA +water solubility materials PVA
for prototype with fastest speed, but also ABS, PC, Nylon, Carbon Fiber, Flexible and more high performance
material for direct application. The dual-hotend is easy to maintain and affordable to replace.

Outage Restore &
Filament Detection

The printer will automatically memorize the current position and save print data. Lower the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power on. No trace! The printer will avoid invalid printing by stoping print and warning when filament runs out.

Linear rail and Servo motors

When it reachs to 1000mm+ length, small rail have big deflection. The D1000 accurate linear rail structure is very thick and strong. It won’t deform or loss precision after print head million times shock. With servo motors, timeliness, fast response, no inertia, no delay. closed-loop control of position overcome the problem of lossing step. heat and noise are significantly reduced. It gives print model ultra high performance with high speed.

Hot Chamber + Filament Dry Room

60°C hot chamber ensures print quality for high performance materials. The fully enclosed chamber can block all external interference. Also this frame can reduce noises, at the same time to provide constant temperature, so that the model won't deform. The filament dry room provides chamber temperatures of 45°C and 65°C to dry 2*5kg/roll filament like PLA, nylon, PC, ABS and other materials with water absorption.

Auto Leveling Platform

Use of 100 points through the high precision servo probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.

HEPA Air Filter

The air filter system can adsorb impurities and gases that generated by printing special filament like ABS, Nylon, PC, more safe and environmental protection which is more suitable for house, school, office space.

Camera Control Technology

Camera control technology allow customers to control printing process on speed,pause,temp.etc with an APP remotely, which can get best printing quality with shortest time without failure. A very useful feature on large model and long time printing.

Stability

The whole-steel body not only ensure the stability during printing but also greatly extend working life. The optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3d printers with whole-steel body have been working for 9 years and more than 30,000 hours.

Printing
Print Technology Fused Deposition Modeling
Build Volume Single Extrusion: 1000*1000*1000 mm
  Dual Extrusion:  940*1000*1000 mm
Number of Nozzles Auto-rising dual extruders
Layer Resolution 0.05 mm
Filament Diameter 1.75 mm
Filament Compatibility ABS,PLA,Carbon Fiber,PETG,Nylon,PC,etc.
Nozzle Diameter 1.0 mm(0.4~1.5 mm optional)
Print File Type STL, OBJ, AMF, Gcode

 

Speed
Best Printing speed 60 mm/s
Max. Printing speed 120 mm/s

 

Software
Software CreatWare, Simplify 3D, Cura, Slic3r, etc
Supported File Types STL,OBJ,Gcode,AMF
Operating Systems Windowsall, macOS

 

Special Function
Outage Restored Save data when power is off
Filament Detection Pause printing when filament run out
Automatic Shut-down Turn off the power automatically when printing is complete
Camera control Camera remote monitoring and real-time control of the printing process

 

Temperature
Max. Nozzle Temperature 420 ℃
Max. Bed Temperature 100 ℃
Hot Chamber Temperature 60 ℃
Filament Dry Room Temperature 45 ℃/65 ℃

 

Mechanical
Construction Power-Coated Steel, Aluminum Casting for Motion Components, POM
Build Plate Aviation aluminum plates
Build Plate Leveling Automatic
Extruder Smart Dual Extruders
Stepper Motors 1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision 0.011 mm
Z Positioning Precision 0.0025 mm

 

Electrical
Power Requirements 220~240 V, 50~60 Hz
Screen 9.7-inch full color touch screen independent operating system (multi-language)
Rated Power Printer: 4000W, Chamber: 4500W
Storage Media U Disk
Connectivity USB

 

Size & Weight
Product Dimensions & Weight 1810*1350*1942mm 650kg
Packing Size & Weight 1980×1520×2200mm 750kg