Bambu Lab

Bambu Lab 3D-Drucker A1 mini


Item number 200307

* Incl. VAT excl. Shipping


The Bambu Lab A1 Mini 3D Printer fundamentally changes FDM 3D printing and redefines flow control. It uses a high-resolution, high-frequency eddy current sensor to precisely measure nozzle pressure. The state-of-the-art algorithm dynamically adjusts the flow rate based on sensor data, ensuring unrivaled printing accuracy.

Plug N Play
The A1 mini is delivered pre-assembled, pre-set and precisely adjusted. Setting up for your first print only takes about 20 minutes.

Fully automatic calibration
A1 mini handles various calibrations all by itself. It automatically and carefully calibrates the Z offset, bed height, vibration resonance and nozzle pressure for EVERY print job.

Auto Z offset
A1 mini probes the bed with the nozzle to measure the absolute Z offset. There is no need to stick a paper for reference.

Automatic vibration calibration
The A1 mini has sensors in the tool head and in the heating bed. One of the first bed sling printers with automatic resonance calibration on both X and Y axes.

Auto Flow Dynamics
A1 mini is the first device of its kind to run the nozzle pressure-based fluid dynamics calibration algorithm. There is no need to draw a pattern or make manual selection, A1 mini does the Pressure Advanced calibration automatically.

Car belt tension
A1 mini can check belt tension automatically through vibration frequency calibration. If the belt is loose, the HMS system will alert you to use the automatic belt tensioner to adjust the belt to the correct tension.

Smooth printing at every turn, every time
The A1 mini revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

High speed precision
Full metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU and most importantly an advanced motion control system that uses these features to print a 14 minute benchy in high quality, following all the rules of speed benchy instantly, without special filaments to use.

Quickly replaceable nozzles
All-new quick-change design for the heating element that can be extended and extended with just one clip.

Print quietly
Active engine noise cancellation and Silent Mode can reduce the noise level to below 48 dB. This makes the A1 mini one of the quietest 3D printers on the market, so you can take a nap while your printer works hard.

Body Build Volume(W*D*H) 180*180*180 mm³
Toolhead Hot End All-Metal
Nozzle Stainless Steel
Max Hot End Temperature 300 °C
Nozzle Diameter 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm
Heatbed Build Plate Bambu Textured PEI Plate (Included)
Bambu Smooth PEI Plate
Max Build Plate Temperature 80°C
Speed Max Speed of Tool Head 500mm/s
Max Acceleration of Tool Head 10000mm/s²
Supported Filament PLA, PETG, TPU, PVA Ideal
ABS, ASA, PC, PA, PET,
Carbon/Glass Fiber Reinforced Polymer
Not Recommended
Sensors Monitoring Camera Low Framerate Camera (Up to 1080P)
Timelapse Supported
Filament Run Out Sensor Yes
Filament Odometry Yes
Power Loss Recover Yes
Filament Tangle Sensor Yes
Physical Dimensions A1 mini : 347*315*365 mm³ , Package size : 385*430*460 mm³ , Net weight 5.5 kg , Gross weight 8.2 kg
A1 mini Combo : Package size 385*430*495 mm³ , Gross weight (AMS lite included) 10.2 kg

Diese Produkte könnten ebenfalls interessant für Sie sein!