Magigoo Haftvermittler Pro PA 50ml

Strong, Tailored Adhesion for Polyamide Filament

Magigoo Pro PA is formulated to overcome the challenges of printing with PA, which naturally has poor bed adhesion and a high tendency to warp. It’s been tested on PA6, PA12, PA66, and their reinforced variants, providing reliable first-layer grip at high temperatures.

Effortless Pop-Off as It Cools

Once the build plate cools to around 40 °C, the adhesive bond weakens significantly. The print pops off easily with just a gentle nudge—no need for spatulas or tools—on surfaces like glass, PEI, Kapton, or flexible steel sheets.

User-Centric & Eco-Friendly

The water-based, non-toxic formula is odorless and safe to use. It can be easily cleaned with a damp cloth or water, and the precision pen format makes it ideal for clean, targeted application—perfect for both hobbyists and professional users.

Optimized for Technical Nylon Printing

This adhesive has been tested with over 100 nylon-based materials, including brands like BASF PAHT CF15, DuPont Zytel, and Owens Corning XSTRAND GF30-PA. It ensures smooth prints, reduced failures, and consistent bed adhesion.

Recommended Application Workflow

1. Shake well before use to mix the components.
2. Apply a thin, even layer to a clean, cold print bed by gently pressing the pen.
3. Heat the bed according to your filament’s specifications and start printing.
   Let the plate cool after printing—your part will release automatically.
   For large models, a 20 mm brim is recommended to maximize adhesion.

Clean the surface with a damp cloth after use, or rinse with water if needed.